在安裝postgreSQL的過程中遇到一個問題，在執行 configure
過程中報以下錯誤,configure: error: readline library not found ,可是我在系統中安裝
readline 包了，
過程中報以下錯誤,configure: error: readline library not found ,可是我在系統中安裝
readline 包了，
1 環境資訊
2 根據提示，測試了下 configre命令，果然報這個錯
[root@HK81-107 postgresql-9.0.0]# ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking which template to use... linux
checking whether to build with 64-bit integer date/time support... yes
checking whether NLS is wanted... no
checking for default port number... 5432
checking for block size... 8kB
checking for segment size... 1GB
checking for WAL block size... 8kB
checking for WAL segment size... 16MB
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking if gcc supports -Wdeclaration-after-statement... yes
checking if gcc supports -Wendif-labels... yes
checking if gcc supports -fno-strict-aliasing... yes
checking if gcc supports -fwrapv... yes
checking whether the C compiler still works... yes
checking how to run the C preprocessor... gcc -E
checking allow thread-safe client libraries... yes
checking whether to build with Tcl... no
checking whether to build Perl modules... no
checking whether to build Python modules... no
checking whether to build with GSSAPI support... no
checking whether to build with Kerberos 5 support... no
checking whether to build with PAM support... no
checking whether to build with LDAP support... no
checking whether to build with Bonjour support... no
checking whether to build with OpenSSL support... no
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for ranlib... ranlib
checking for strip... strip
checking whether it is possible to strip libraries... yes
checking for ar... ar
checking for tar... /bin/tar
checking whether ln -s works... yes
checking for gawk... gawk
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for bison... no
configure: WARNING:
*** Without Bison you will not be able to build PostgreSQL from CVS nor
*** change any of the parser definition files. You can obtain Bison from
*** a GNU mirror site. (If you are using the official distribution of
*** PostgreSQL then you do not need to worry about this, because the Bison
*** output is pre-generated.)
checking for flex... no
configure: WARNING:
*** Without Flex you will not be able to build PostgreSQL from CVS nor
*** change any of the scanner definition files. You can obtain Flex from
*** a GNU mirror site. (If you are using the official distribution of
*** PostgreSQL then you do not need to worry about this because the Flex
*** output is pre-generated.)
checking for perl... /usr/bin/perl
configure: using perl 5.8.8
checking for main in -lm... yes
checking for library containing setproctitle... no
checking for library containing dlopen... -ldl
checking for library containing socket... none required
checking for library containing shl_load... no
checking for library containing getopt_long... none required
checking for library containing crypt... -lcrypt
checking for library containing fdatasync... none required
checking for library containing gethostbyname_r... none required
checking for library containing shmget... none required
checking for -lreadline... no
checking for -ledit... no
configure: error: readline library not found
If you have readline already installed, see config.log for details on the
failure. It is possible the compiler isnt looking in the proper directory.
Use --without-readline to disable readline support.
[root@HK81-107 postgresql-9.0.0]# ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking which template to use... linux
checking whether to build with 64-bit integer date/time support... yes
checking whether NLS is wanted... no
checking for default port number... 5432
checking for block size... 8kB
checking for segment size... 1GB
checking for WAL block size... 8kB
checking for WAL segment size... 16MB
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking if gcc supports -Wdeclaration-after-statement... yes
checking if gcc supports -Wendif-labels... yes
checking if gcc supports -fno-strict-aliasing... yes
checking if gcc supports -fwrapv... yes
checking whether the C compiler still works... yes
checking how to run the C preprocessor... gcc -E
checking allow thread-safe client libraries... yes
checking whether to build with Tcl... no
checking whether to build Perl modules... no
checking whether to build Python modules... no
checking whether to build with GSSAPI support... no
checking whether to build with Kerberos 5 support... no
checking whether to build with PAM support... no
checking whether to build with LDAP support... no
checking whether to build with Bonjour support... no
checking whether to build with OpenSSL support... no
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for ranlib... ranlib
checking for strip... strip
checking whether it is possible to strip libraries... yes
checking for ar... ar
checking for tar... /bin/tar
checking whether ln -s works... yes
checking for gawk... gawk
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for bison... no
configure: WARNING:
*** Without Bison you will not be able to build PostgreSQL from CVS nor
*** change any of the parser definition files. You can obtain Bison from
*** a GNU mirror site. (If you are using the official distribution of
*** PostgreSQL then you do not need to worry about this, because the Bison
*** output is pre-generated.)
checking for flex... no
configure: WARNING:
*** Without Flex you will not be able to build PostgreSQL from CVS nor
*** change any of the scanner definition files. You can obtain Flex from
*** a GNU mirror site. (If you are using the official distribution of
*** PostgreSQL then you do not need to worry about this because the Flex
*** output is pre-generated.)
checking for perl... /usr/bin/perl
configure: using perl 5.8.8
checking for main in -lm... yes
checking for library containing setproctitle... no
checking for library containing dlopen... -ldl
checking for library containing socket... none required
checking for library containing shl_load... no
checking for library containing getopt_long... none required
checking for library containing crypt... -lcrypt
checking for library containing fdatasync... none required
checking for library containing gethostbyname_r... none required
checking for library containing shmget... none required
checking for -lreadline... no
checking for -ledit... no
configure: error: readline library not found
If you have readline already installed, see config.log for details on the
failure. It is possible the compiler isnt looking in the proper directory.
Use --without-readline to disable readline support.
根據提示，應該是沒有安裝 readline包。
3 檢查系統是否安裝 readline 包
[root@HK81-107 postgresql-9.0.0]# rpm -qa | grep readline
readline-5.1-3.el5
[root@HK81-107 postgresql-9.0.0]# rpm -qa | grep readline
readline-5.1-3.el5
說明系統已經安裝了 readline包。
4 通過 yum 搜索相關的 readline 包
[root@HK81-107 postgresql-9.0.0]# yum search readline
lftp.i386 : A sophisticated file transfer program
lftp.i386 : A sophisticated file transfer program
php-readline.i386 : Standard PHP module provides readline library support
lftp.i386 : A sophisticated file transfer program
readline.i386 : A library for editing typed command lines.
compat-readline43.i386 : The readline 4.3 library for compatibility with older software.
readline-devel.i386 : Files needed to develop programs which use the readline library.
readline.i386 : A library for editing typed command lines.
[root@HK81-107 postgresql-9.0.0]# yum search readline
lftp.i386 : A sophisticated file transfer program
lftp.i386 : A sophisticated file transfer program
php-readline.i386 : Standard PHP module provides readline library support
lftp.i386 : A sophisticated file transfer program
readline.i386 : A library for editing typed command lines.
compat-readline43.i386 : The readline 4.3 library for compatibility with older software.
readline-devel.i386 : Files needed to develop programs which use the readline library.
readline.i386 : A library for editing typed command lines.
根據提示，有一個包引起了注意 "readline-devel",
猜想可能與這個包有關。
5 安裝 readline-devel 包
[root@HK81-107 postgresql-9.0.0]# yum -y install -y readline-devel
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
--> Running transaction check
---> Package readline-devel.i386 0:5.1-3.el5 set to be updated
--> Processing Dependency: libtermcap-devel for package: readline-devel
--> Running transaction check
---> Package libtermcap-devel.i386 0:2.0.8-46.1 set to be updated
--> Finished Dependency Resolution
5 安裝 readline-devel 包
[root@HK81-107 postgresql-9.0.0]# yum -y install -y readline-devel
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
--> Running transaction check
---> Package readline-devel.i386 0:5.1-3.el5 set to be updated
--> Processing Dependency: libtermcap-devel for package: readline-devel
--> Running transaction check
---> Package libtermcap-devel.i386 0:2.0.8-46.1 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
readline-devel i386 5.1-3.el5 base 146 k
Installing for dependencies:
libtermcap-devel i386 2.0.8-46.1 base 56 k
Package Arch Version Repository Size
=============================================================================
Installing:
readline-devel i386 5.1-3.el5 base 146 k
Installing for dependencies:
libtermcap-devel i386 2.0.8-46.1 base 56 k
Transaction Summary
=============================================================================
Install 2 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
=============================================================================
Install 2 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size:
201 k
Downloading Packages:
(1/2): libtermcap-devel-2 100% |=========================| 56 kB 00:00
(2/2): readline-devel-5.1 100% |=========================| 146 kB 00:00
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: libtermcap-devel ######################### [1/2]
Installing: readline-devel ######################### [2/2]
Downloading Packages:
(1/2): libtermcap-devel-2 100% |=========================| 56 kB 00:00
(2/2): readline-devel-5.1 100% |=========================| 146 kB 00:00
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing: libtermcap-devel ######################### [1/2]
Installing: readline-devel ######################### [2/2]
Installed: readline-devel.i386
0:5.1-3.el5
Dependency Installed: libtermcap-devel.i386 0:2.0.8-46.1
Complete!
Dependency Installed: libtermcap-devel.i386 0:2.0.8-46.1
Complete!
6 再次執行 configure 成功。
7 還有一種解決方法：在configure 加上參數 --without-readline ，不過這樣就不可以在命令列裡面輸入了，所以不建議這樣。。。
8 configure 成功之後接著就是make了
9 make之後就是make install之後安裝成功的話就會出現如下圖所示的介面
10.修改postgreSQL安裝目錄的許可權，預設的安裝目錄在/usr/local/pgSQL下
修改許可權命令為chmod -R 777 /usr/local/pgSQL
運行之後pgSQL目錄下面的所有檔都會有XWR(X：可執行，W：可寫，R：可讀)許可權。命令中的-R參數說明是遞迴的把資料夾pgSQL目錄及其目錄下的所有檔都修改為相應的許可權，777就是代表加上對本用戶，本用戶組的其他用戶和不是這個組的用戶增加XWR許可權。
11.
到此，PostgreSQL的安裝完成了，接下來可以試著用用這個開來源資料庫啦…
1)：首先是初始化資料庫。進入剛剛安裝PG的資料夾/home/pg/postgr(這是我安裝pg的目錄，預設的安裝目錄是在/usr/local/pgSQL下)，輸入./bin/initdb –D ../data. 這裡的命令格式還需要查明白，特別是-D等參數的意義。這樣會在postgr下面產生一個data資料夾。
2)：啟動資料庫伺服器。./bin/postmaster –D ./data&. 其中&的意義需要弄明白，差這一個符號就會導致一定的問題，貌似啟動資料庫伺服器還可以使用另外的命令：/bin/postgres -D ./data 或者是 ./bin/pg_ctl -D ./data -l logfile start。這些命令的區別可以自己查查手冊或者諮詢一下助教。
3)：在另外一個命令列下面，創建一個本地資料庫。./bin/createdb testdb，其中testdb是資料庫名。在data目錄下會產生一個資料夾
4)：連結資料庫伺服器。./bin/psql testdb. 此時，輸入help可以獲得幫助。見下圖
5)：訪問資料庫。這裡就是輸入sql命令了，以後調試的入口就是這裡吧。結束後按\q退出。
6)：最後是關閉資料庫伺服器。./bin/pg_ctl stop –D ./data.
沒有留言:
張貼留言