ndd命令

該命令是在Solaris下用於查詢和修改系統中驅動程式模組的配置參數;目前只對TCP/IP協定簇模組驅動程式實現了ndd命令的功能;
使用方法:
ndd [-set] <驅動程式模組路徑名> <參數名> [值]

例如:查詢TCP驅動模組的相關配置參數的説明方法為下命令：
ndd /dev/tcp \?
會輸出以下內容：
? (read only)
tcp_time_wait_interval (read and write)
tcp_conn_req_max_q (read and write)
tcp_conn_req_max_q0 (read and write)
tcp_conn_req_min (read and write)
tcp_conn_grace_period (read and write)
tcp_cwnd_max (read and write)
tcp_debug (read and write)
tcp_smallest_nonpriv_port (read and write)
tcp_ip_abort_cinterval (read and write)
tcp_ip_abort_linterval (read and write)
tcp_ip_abort_interval (read and write)
tcp_ip_notify_cinterval (read and write)
tcp_ip_notify_interval (read and write)
tcp_ipv4_ttl (read and write)
tcp_keepalive_interval (read and write)
tcp_maxpsz_multiplier (read and write)
tcp_mss_def_ipv4 (read and write)
tcp_mss_max_ipv4 (read and write)
tcp_mss_min (read and write)
tcp_naglim_def (read and write)
tcp_rexmit_interval_initial (read and write)
tcp_rexmit_interval_max (read and write)
tcp_rexmit_interval_min (read and write)
tcp_deferred_ack_interval (read and write)
tcp_snd_lowat_fraction (read and write)
tcp_sth_rcv_hiwat (read and write)
tcp_sth_rcv_lowat (read and write)
tcp_dupack_fast_retransmit (read and write)
tcp_ignore_path_mtu (read and write)
tcp_rcv_push_wait (read and write)
tcp_smallest_anon_port (read and write)
tcp_largest_anon_port (read and write)
tcp_xmit_hiwat (read and write)
tcp_xmit_lowat (read and write)
tcp_recv_hiwat (read and write)
tcp_recv_hiwat_minmss (read and write)
tcp_fin_wait_2_flush_interval (read and write)
tcp_co_min (read and write)
tcp_max_buf (read and write)
tcp_strong_iss (read and write)
tcp_rtt_updates (read and write)
tcp_wscale_always (read and write)
tcp_tstamp_always (read and write)
tcp_tstamp_if_wscale (read and write)
tcp_rexmit_interval_extra (read and write)
tcp_deferred_acks_max (read and write)
tcp_slow_start_after_idle (read and write)
tcp_slow_start_initial (read and write)
tcp_co_timer_interval (read and write)
tcp_sack_permitted (read and write)
tcp_trace (read and write)
tcp_compression_enabled (read and write)
tcp_ipv6_hoplimit (read and write)
tcp_mss_def_ipv6 (read and write)
tcp_mss_max_ipv6 (read and write)
tcp_rev_src_routes (read and write)
tcp_ndd_get_info_interval (read and write)
tcp_rst_sent_rate_enabled (read and write)
tcp_rst_sent_rate (read and write)
tcp_use_smss_as_mss_opt (read and write)
tcp_wroff_xtra (read and write)
tcp_extra_priv_ports (read only)
tcp_extra_priv_ports_add (write only)
tcp_extra_priv_ports_del (write only)
tcp_status (read only)
tcp_bind_hash (read only)
tcp_listen_hash (read only)
tcp_conn_hash (read only)
tcp_acceptor_hash (read only)
tcp_host_param (read and write)
tcp_time_wait_stats (read only)
tcp_host_param_ipv6 (read and write)
tcp_1948_phrase (write only)
tcp_reserved_port_list (read only)
tcp_close_wait_interval(obsoleted- use tcp_time_wait_interval) (no read or write)

查詢TCP的傳輸報文長度參數：
ndd /dev/tcp tcp_mss_def_ipv4
ndd /dev/tcp tcp_mss_max_ipv6
ndd /dev/tcp tcp_mss_min

查詢TCP的接受連接請求佇列的大小：
ndd /dev/tcp tcp_conn_req_max_q
ndd /dev/tcp tcp_conn_req_max_q0
ndd /dev/tcp tcp_conn_req_min

查詢TCP擁塞視窗的最大大小：
ndd /dev/tcp tcp_cwnd_max

查詢TCP資料緩存空間的最大大小：
ndd /dev/tcp tcp_max_buf